Flow range: 0.005 to 200 cc/min (0 to 0.053 gpm)
Accuracy (at 3 cP): ± 0.2% of reading over a 200:1 range
Maximum Operating Pressure: 500 bar (7250 psi)
Displacement: 0.3 cc/rev (0.018 in3/rev)
Weight: 0.9 kg (2.0 lbs) Dimensions: Ø 57mm x 90mm tall (Ø 2.3” x 3.5” tall)
Recommend Filtration: 5 micron (2400 mesh)
Port Size: 1/4" or 6mm tube fitting
Fluids: Most non aqueous, hydrocarbon based fluids
Materials of Construction
Body: Case hardened stainless steel, type 316
Pistons: Case hardened stainless steel, type 316
Crankshaft: Stainless steel, type 316
Bearings: Hybrid – ceramic balls with enhanced corrosion resistant stainless steel
Seals: Viton® "O" rings - standard; Perfluoroelastomer - optional
Transmitter Variations (dependent on model #)
Model
P001 Frequency
Single phase:
Output Signal: 5V single phase (current sinking, also available)
Output Resolution: typical k-factor 12,000 pulses/cc
Temperature Rating*: -40°C to 225 °C
Quadrature:
Output Signal: 5V Quadrature
Output Resolution: typical k-factor 24,000 pulses/cc
Temperature Rating*: -40°C to 225 °C
P001 Analog
Output Signal: ± 20mA or ± 10V
Output Resolution: 16 bit
Temperature Rating*: -40°C to 225 °C
*See spec sheets for temperature rating of each model
Compliance: CE Certified, Ex-proof version available with ATEX/IECEx II 2 G Ex db IIB Tx Gb as well as UL, cUL certification for Class 1, Division 1, Groups C and D, Tx
Dimensional Drawing
Pressure Drop Curve
Library
| Attachment | Size |
|---|---|
 P001 Part Number Selector | 75.4 KB |
| P001 Analog Spec Sheet | 326.04 KB |
| P001 Frequency Spec Sheet | 349 KB |
| Piston Flow Meter Manual | 2.44 MB |
| Example Calibration P001 | 306.48 KB |